40

Digester House
Circa 1923
Powell River, British Columbia, Canada

Credits:
FC024
The Powell River Mill Story, copyright Bill Thompson 2001.

41

We are all glad to see our friend and work mate Gambetti out and around again after being confined to his bed for the past few weeks. We hope that soon he will be his own self again, and begin to promenade the flume of he Grinder Room, as we surely miss his high stepping.

While trying to find the reason for the smile on David Cummings' face, word came to hand that his wife had presented him with a fine baby girl. The slogan now is "keep on smiling."

Bill McGillivray came back from a trip up the lake a few days ago, with the following statement. We are going to give Billy's story and then the revised version. Here it is verbatim:

"Say, I believe Sid Murray has started a skunk farm up at his ranch. I got wind of it yesterday as I passed. You know the price of fur is high, and skunk is still higher. Sid is out to make a big per scent on his investment."

The truth is that Sid and his visitors have caught so many trout the last few weeks he has been using them for fertilizer. This mixed with some dope Sid is using for the extermination of the cutworm, gave off such an effluvium as to cause Billy to jump to conclusions.

Article entitled Grinder Room
Powell River Digester
Vol. 2, No. 10
October, 1923

42

Grinder room crew
29 July 1922
Powell River, British Columbia, Canada

Credits:
P10548

43

Basically TMP is made from two main sources of chips. One is sawmill residuals- if you think about a log, when your're making squares, you cut off the edges. These edges are the best chip you can get because it's juvenile fibre - it's the growing part of the tree.

The second source is in the grade of wood that comes out of the forest, it's called pulp wood - it's either got too many knots to make lumber out of it, or it's broken ends, so it's truly a bi-product of logging. Most logging is done to make finished lumber. But in the mix of the forest you can see crummy trees, bent trees, twisted trees - that's basically pulp wood.

Taped interview for
People of The White City

44

TMP Building
8 July 1976
Powell River, British Columbia, Canada

Credits:
P07934
Bryan Kyle, Photographer
Peter Cable

45

TMP is a mechanical groundwood really. It takes chips rather than a log and it grinds the chips between two metal plates, which have got serrations on them, so one plate goes in one direction, and the other plate in the other direction, and they just grind away and wear away the chips into a pulp. It's similar to groundwood, but it's got longer fibres than groundwood.

I think the main advantage of TMP is it's easier to produce - it's not so labour intensive. There are still a few grinder rooms, but they're disappearing. G4 is still here, but it's being closed down this year. So we will be out of groundwood completely.

Taped interview for
People of the White City

46

Monitoring the TMP
Circa 1987
Powell River, British Columbia, Canada

Credits:
S748
Ian Cameron, photographer
Peter Cable

47

Stock prep used to be the beater room, and it changed later on. It was just a name change because we were preparing the stock for the machines, and the beater room really didn't sound like we were doing anything as far as the machines go.

There was no other operation in the mill like the old beater room. It was a good atmosphere. Everybody worked hard and they all worked together.

Taped interview
People of The White City

48

Stock Prep-Beater Room
13 July 1951
Powell River, British Columbia, Canada

Credits:
A14-4-2
Ted Cooper

49

They had automatic beaters on 7-8 and 5-6; they had a huge beater on 5-6. It was completely different. But 7-8 had their own beaters, and they had one operator later on and they had a walkway between the beaters so he could monitor both at the same time. Then they put lights on and horns when the machine broke, because they had a signal that they were breaking, and they had automatic showers that went on right away, so it was different, but they still had plug-ups.

I remember working on 5-6 as a helper. That was during the war. That was a busy job - they were wide machines, and there was one person to each beater, one on 5, one on 6 - this was the original beaters. That was a tough job - when they broke you had to really hustle because a sheet was almost 1.5 times as wide as number 1,2,3,4, and they were going that much faster - they were doing about 1100 feet a minute, and I think number 1-2 were doing about 660 feet a minute, so there was a lot of paper coming down.

Taped interview
People of The White City

50

New Machine Room Broke Beater
Circa 1940
Powell River, British Columbia, Canada

Credits:
P00608
Ted Cooper